86-371-86502067
Green walnut peeling machine
Zhengzhou Dingsheng Machine Manufacturing Co., Ltd was established in 2002, the main business of which is engaged in wood shaving machine R&D, equipment manufacturing, installation commission and training services. We have our own manufacturing factory.With the innovation and optimization of the industry, we are marketing our products into international market, and the export business is expanding rapidly.
1. Walnut Shelling Equipment is mainly used for peeling the green shell of walnuts to
get the walnut with hard shell.
2. According to the size of walnuts, adjust the internal space to process different size walnuts.
3. Through adjusting the motor to change the rotation speed and internal wind.
4. Feed materials from the upper part of Walnut Cracking Machine, after cracking the shells,
then Walnut Nuts & Shells Separator machine separate meat from shells, which can save time
and energy , improve working efficiency.
5. The walnuts kernel & shell separating machine can also process cashew nuts, almonds and
other types of hard-shelled nuts.
6. Long life service, easy to maintain and little noise.
Features
1.Walnut shelling unit consists of Walnut Cracking Machine and Walnut kernel & shells separator.
2. Walnut Cracking Machine is particularly useful for cracking walnuts. This machine can be
easily adjusted to accommodate nuts such as English walnuts, hazelnuts, or pecans.
3. The objective of walnut kernel & shells separator is to get the meat from hard-shelled nuts in quantity.
4. The Walnut Shelling Equipment is professional equipment for shelling walnuts.
The new green walnut veneer peeling cleaning machine peeling freedom, walnut veneer into the hob area, high-speed operation of the hob to start cutting peel, walnuts while free rolling it all hob surface is cutting off the net walnut small diameter can not easily be cut into, constantly get out of peeling area, a small amount of net peel was not cut wire brush to remove, clean and get out of walnut processing zones, into the container.
Continuous feed of new walnut, Peeling after discharge. The distance between the grille and peeling hob can be automatically adjusted, can also be manually adjusted by adding or subtracting shims region according to the size of walnuts, peel the thickness, to reduce the rate of broken shell, improving off the net rate.
2.Technical parameters
Model | Dimension | Weight | Voltage | Power | Capacity | Peeling rate |
DS-300 | 1100*500*1000mm | 120kg | 220V/380V | 0.75kw | 300-400kg/h | >98% |
DS-600 | 1400*600*1000mm | 150kg | 220V/380V | 1.5kw | 600-700kg/h | >98% |
| Model | Capacity | Voltage | Power | Peeling rate | Crush rate | Dimensions | Weight |
| DS-800 | 800-1000kg/h | 220V/380 | 0.75kw | 99% | 0.50% | 1350*580*780mm | 100kg |
3. Maintance of the walnut peeling machine
1. Before running the Walnut Shelling Equipment, check up each bearing, if it is lack of oil,
please add engine oil.
2. If not use for a long time, please clean the machine and keep little engine oil in the
parts need lubrication so that it does not rust.
3. Reuse the machine, run the machine with nothing 10-15 minutes, remove the sundries,
and then heating the machine to work.
If you have any question, you can contact with me freely.
Phone number: +86 0371 86502066
